New 180 E-Cut™ Hybrid Walk Greens Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere180 E-Cut™ Hybrid Walk Greens Mower

Add Model --Please Select-- 220 E-Cut™ Hybrid (Model year 2021) Eclipse® 2 118 Greensmaster® Flex 1820

Add Model --Please Select-- 220 E-Cut™ Hybrid (Model year 2021) Eclipse® 2 118 Greensmaster® Flex 1820

Engine Type	Air-cooled, Gas
Horsepower	At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Cutting width	45.7 cm 18 in.
Reel diameter	127 mm 5 in.
Number of blades	7, 11 or 14 blade
Frequency of clip standard	Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in.
Traction drum	Dual, aluminum
Forward speed	With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph
Weight (less GTCs, gear drive and transport wheel with catcher)	113 kg 249 lb
Operator ear	79 dBA

Type	Air-cooled, Gas
Cycle	4-cycle
Bore and stroke	60x42 mm 2.36x1.65 in.
Piston displacement	7.4 cu in. 122 cc
Compression ratio	8.5:1
Horsepower	At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Direction of rotation of output shaft	Counterclockwise viewed from shaft side
Inclination limit	Tilted up to 20 degrees in any direction
Idle speed at output shaft	1400 (+/- 150) rpm
Maximum speed at output shaft	2950 (+/- 150) rpm

Type	Regular grade unleaded or leaded
Tank capacity	2.5 L 0.66 U.S. gal.

Type	SAE 30 or SAE 10W-30
Capacity	0.6 L 0.63 U.S. qt
Differential drive capacity	0.14 L 0.3 U.S. qt

Cutting width	45.7 cm 18 in.
Cutting height (minimum)	Standard - 3.0-mm bedknife Min. 3.2 mm 0.125 in. Max. 22 mm 0.875 in. Optional - 2.5-mm bedknife Min. 2.5 mm 0.098 in. Max. 22 mm 0.875 in. option Optional - 2.0-mm bedknife Min. 2.0 mm 0.078 in. Max. 22 mm 0.875 in. standard
Frequency of clip standard	Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in.

Diameter	127 mm 5 in.
Number of blades	7, 11 or 14 blade
Material	Heat-treated chromium molybdenum steel
Bedknife - standard

Brush	Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon
GTC cutter blades
Adjustable brush or cutter height	Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm 0.0313 in.
Gear drive	Gear driven from reel shaft, opposite direction of reel, rotation powers brush or GTC vertical cutter

Size, lb (kg)	3.2 kg 7 lb
Type	Polyethylene

Transport	Belt tension
Reel jaw-type clutch	On/off
Brush/GTC jaw-type clutch	On/off
Traction drum	Dual, aluminum

Forward speed	With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph
Roller - rear	Aluminum, diameter: 190 mm 7.5 in.
Roller - front (grooved or smooth)	Machined steel, diameter: 50 mm 2 in. for cutting height adjustment

Length (with tires installed)	99 cm 39 in.
Width (with tires installed)	94.6 cm 37.25 in.
Height (with tires installed)	119 cm 47 in.
Weight (less GTCs, gear drive and transport wheel with catcher)	113 kg 249 lb

Type	ANSI B71.4-2004

Operator ear	79 dBA
Measuring standard	ISO 11201
Attachments installed	GTCs, reels engaged